You’ve got power data. The problem is it’s everywhere.
Your Victron gear lives in VRM. Your Deye inverter wants its own app. The Solis has a web portal. The generator has a physical gauge you have to walk to. The pump circuit isn’t monitored at all. Your installer can’t see any of it unless they drive out. And nothing talks to anything else.
You need one login. One dataset. Answers that span every device.
That’s why we built OGLAS energy monitoring. And it runs on your site, not someone else’s cloud.
Got gear from 3 different brands?
We read Victron, Deye, Solis, Selectronic, and Modbus industrial controllers — all in one dataset, no cloud accounts required.
At the low end: a generator start battery voltage, a clamp on a single circuit, a plug-in power meter. At the high end: MPPT controllers over VE.Direct, CAN bus, or Modbus, hybrid inverters over TCP/IP or API.
No “that brand isn’t supported.” If it carries a signal, we read it.
Equipment too far away for wires?
Generator 200 metres down the track? Wireless. Water pump circuit a kilometre away? Long-range LoRa radio. Every sensor finds its path home.
We bridge Ethernet, CAN bus, RS-232, RS-485, BLE, LoRa, and mesh into a single hub that sends data onward over Wi-Fi, LTE, or satellite. Or stores it all locally with full dashboards and query access — no internet required.
And yes, power data + water levels + temperature — combined, on one screen.
Want answers, not just another dashboard?
Automatic monitoring runs 24/7 with real-time dashboards and alerts. But the real power is in the questions:
“When did the generator last run, and how many kWh?” “Which days did solar surplus drop while the pump was running?” “What’s the trend on that one circuit creeping up?”
Share freely. Full access for your team, read-only for your installer, daily PDF summaries by email, data pushed to an external system over REST API. Ad-hoc queries and AI-assisted reports across every device.
Here’s what that looks like on a real site
Building 1: Deye hybrid inverter — solar, battery, grid, and load. Building 2: Victron MPPT + BMV shunt, no internet, 150 m from the house. Down the track: generator with start battery and run-hour sensor, 200 m away. Pump circuit: current clamp over LoRa, a kilometre down the paddock.
OGLAS brings it all onto one local dashboard — production, consumption, battery state, generator status, pump draw. The owner sees it on a tablet in the kitchen. The installer gets a weekly PDF by email. No VRM login. No Solis cloud. No Deye app. One place. Open formats. Theirs forever.
What we read
- Victron — MPPT, inverter, BMV, SmartShunt (VE.Direct, Bluetooth)
- Deye — hybrid inverters: solar, battery, grid, load — one read
- Solis — inverters over API, TCP/IP, or Modbus — no cloud dependency
- Selectronic — SP PRO inverters and charge controllers
- Modbus / industrial — PLCs, energy meters, site controllers (RS-485)
- CAN bus — vehicle and industrial power systems
- Battery voltage — any battery, any chemistry, simple measurement
- AC circuits — voltage, current, frequency, power factor, energy
- DC shunts & clamps — current and amp-hours on any DC feed
- Generator controllers — start/stop, run hours, output
How we connect
- LoRa — kilometres of range, low power, sensor network backbone
- Mesh — self-healing, multi-hop for complex terrain
- Wi-Fi & Ethernet — where infrastructure already exists
- Bluetooth Low Energy — short-range device links, no pairing pain
- CAN bus & RS-485 — wired industrial and vehicle, direct read
- LTE & Satellite — when data leaves the site
One hub aggregates every protocol. One uplink. Or store it all locally — fully functional dashboards, no uplink required.
What you get
- Live dashboards — production, consumption, battery, generator
- Ad-hoc queries — ask anything, get a table or chart in seconds
- AI-assisted reports — natural-language questions across all devices
- Custom reports — daily summaries, weekly trends, seasonal comparisons
- Alerting — low battery, generator run time, surplus available
- Multi-user sharing — full, read-only, or filtered by device/time
- API access — REST and WebSocket, push or pull, integrate anywhere
All in standard formats. Your data never lives behind a vendor login.
Want to see this for your site?
Every solar install, every generator, every battery bank — from a single panel to a factory, multi-home estate, or remote farm — has a story to tell. We build the system that reads it, gets the data home, and makes it answer your questions.
Or reach us directly: scottp@dd.com.au
—
Built by Scott Penrose at Rainbow House / Digital Dimensions.